How do i program a car remote control for an Achieva SL Year 1995?

Question by : How do i program a car remote control for an Achieva SL Year 1995?
I have tried many things to program but it woud not work, how do i program the remote?

Best answer:

Answer by Roger
The dealer can tell you how to do it!

Give your answer to this question below!

One comment

  1. 1. Proceed as follows.

    2. Remove the ignition key from the ignition lock cylinder.

    3. Close all of the doors.

    4. Press and hold the “unlock” switch on the Left Front (LF) door.

    5. Insert and remove the ignition key twice, without rotating the ignition lock cylinder.

    6. Insert the ignition key a third time leaving the key in the ignition lock cylinder. The ignition must be in the OFF position.

    7. Release the door “unlock” switch, three fast chimes will be heard when the remote control door lock receiver enters the programming mode.

    8. Press and hold the transmitter “lock” and “unlock” buttons simultaneously for at least 12 seconds. Two fast chimes will be heard confirming successful programming.

    9. Repeat step number eight for each additional transmitter to be programmed.

    10. Remove the ignition key from the ignition lock cylinder. The Remote Keyless Entry (RKE) transmitter(s) should now be programmed.

Leave a Reply

Your email address will not be published. Required fields are marked *